企業QQ:2880626087
電話;021-69001039
手機;17321017802(微信)
郵箱;17321017802@163.com
聯系人;周彩云
地址:上海市嘉定區江橋嘉涌路99弄6號713室
2. FLOW RATE
Each valve is designed for a certain maximum flow
- due to its nominal size. At ths flow it is still reasonable to operate the valve.
An operation above this value will boost the power dissipation.
This value also varies from valve to valve.
3. TYPE OF HYDRAULIC FLUID
The type of operating fluid is closely linked to its viscosity.
HYDAC can only recommend hydraulic fluids according to
DIN 51524 Part 1 and 2. For these fluids the function of the valves is warranted.
HYDAC valves may be used generally
only in specific viscosity ranges, as in
too thin or thick liquids, the assured
features can not be fulfilled. These
viscosities are also different for the
different valves, but in average in the
range of 10 mm? /s to 420 mm?/ s.
Like the ambient temperature the media temp.
range has a direct effect on the used materials in the valve,
e.g. their mech. strength. Generally, the maximum
temperature depends primarily on the sealing materials. HYDAC defines here:
zzNBR: from -30°C to +100°C (solenoid valves - 20°C)
zzFPM: from -20°C to +120°C (all other influences see point 4)
In solenoid valves coils are used
which are designed to operate safely in the voltage
range of +/- 15% of nominal voltage at max. 60 ° ambient temperature.
The combination of steady surge and very hot temperatures
can result in extreme cases to failure of the solenoid.
Therefore always a good heat dissipation and voltage level has to be assured.
021-39526589
網址:m.40days40nites.com
地 址:上海市嘉定區嘉涌路99弄
6號樓713室